Bryan Industrial Coffee Table

Postby Nathan-MoreLikeHome » June 30th, 2015 » pinned x times

I've seen this style of coffee table pop up quite a few time lately. I spotted one on pinterest and fell in love with the industrial vibe and the combo of open shelving with drawers.

Shopping List:
1 or 2 sheets 1/2" plywood (if you're using drawer slides you can skip the bottom shelf and need only one sheet. without drawer slides you will need the second sheet to make a bottom shelf)
6 - 2x2 @ 8'
1 - 1x6 @ 8'
1 - 1x6 @ 6'
1 - 1x2 @ 10'
1 - 1x3 @ 6'
2 - 1x4 @ 10' (if you're not using drawer slides skip the 1x4s and get an extra 8' and 10' 1x6 instead)
4 sets 14" side-mount drawer slides (go for full extension!)
industrial style wheels (big wheels like this are pretty pricey, let me know if you find a good deal!)
wood filler
wood glue
1 1/4" screws
2" screws
Kreg Jig with 1 1/4" and 2 1/2" pocket screws (optional. you can also use 1" kreg screws to install the shelves)
finishing nails (optional)

Finished Dimensions: 48" wide x 33" deep x 17 1/4" high (plus wheels)



Visit Project Site (external link)

Return to Furniture






The Projects community is a place to find and share DIY projects.





Best of MoreLikeHome DIY Projects








cron