Build a Narrow Entry Table

Postby Nathan-MoreLikeHome » August 27th, 2013 » pinned x times

Step-by-step instructions to build your own entry table with MoreLikeHome.net!

Shopping List:
4 - 2x2 @ 8' long
1 - 1x3 @ 10' long
1 - 1x10 @ 10' long
1 - 1x2 @ 2' long (4' may be the shortest available, or use a couple 1' scrap pieces)
1 - 1x8 @ 6' long
1 - 1x4 @ 12' long
1 set of 12" drawer slides
2 drawer pulls
2 baskets like these or a similar size

Tools:
Saw
Drill
1 1/4” screws (or Kreg Jig & 1 1/4" self tapping screws)
2" screws (or Kreg Jig &1 1/4" self tapping screws)
1 1/4" finishing nails
wood glue
Finishing supplies (wood filler, sandpaper, paint, etc.)
**optional: Kreg Jig - you can definitely complete this project without one, but it would be really helpful to have here. You'll have a lot of holes to fill on the outside using regular screws, and a Kreg would allow you to hide almost all of them on the inside instead!**



Visit Project Site (external link)

Return to Furniture






The Projects community is a place to find and share DIY projects.





Best of MoreLikeHome DIY Projects








cron