Palm Sideboard

Postby Georgia-MoreLikeHome » March 11th, 2013 » pinned x times

Inspired by Crate and Barrel! Full step-by-step instructions, cut lists, shopping list, etc.

Shopping List:
3 - sheets 3/4" plywood (you really only need 2 1/2, so see if your store sells 1/2 sheets or scrap pieces instead of purchasing a full 3rd sheet)
1 - 2x6 @ 6' long (you only need 3', so check to see if your store carries shorter boards)
1 - 1x3 @ 10' long
3 - 1x6 @ 8' long
1 - 1x8 @ 8' long
8 - 1x2 @ 10' long
1 - 1x2 @ 8' long
3 sets of 16" drawer slides (we like euro style slides)

1 1/4” screws (or Kreg Jig & 1 1/4" self tapping screws)
2" screws (or Kreg Jig & 2 1/2" self tapping screws)
1 1/4" finishing nails
Wood glue
Wood filler
Sandpaper (a power sander is great if you have one)
**optional: Kreg Jig - you can definitely complete this project without one, but it would be really helpful to have. You'll have a LOT of holes to fill on the outside of the dresser using regular screws, and a Kreg would allow you to hide almost all of them on the inside instead!**

Visit Project Site (external link)

Return to Furniture

The Projects community is a place to find and share DIY projects.

Best of MoreLikeHome DIY Projects